Terk Universal Remote Codes & Program Instructions

If you control everything with one remote, then you need to apply these universal codes. For this you need to find the code that corresponds to the brand of your TV. After that, you now need to proceed with programming the selected code from the shared list below. You might be thinking about the programming process. Then let me tell you, you just need to enter the 4 digit code using the Terk Universal Remote Control Codes and the process is almost done.

Terk Universal Remote Control Code List

Mark Remote codes
AOC 1004, 1005, 1006, 1007, 1175, 1082, 1176, 1195, 1196, 1237
Admiral 1001, 1173, 1083, 1211
Adventure 1174
Aiko 1016
Akai 1002
Mountain peak 1236, 1240, 1241
Audiovox 1038
Broksonic 1250, 1280
Citizen 1004, 1006, 1008, 1171, 1038, 1016, 1105, 1196, 1132
Craig 1038
Curtis Mathematics 1000, 1004, 1006, 1015, 1049, 1105, 1073, 1171, 1196, 1212
Daewoo 1004, 1005, 1006, 1018, 1017, 1082, 1171, 1202, 1196
Daytron 1004, 1006, 1171, 1196
Emerson 1004, 1006, 1012, 1025, 1023, 1029, 1030, 1035, 1033, 1037, 1036,
To consider 1004, 1006, 1196
Fujitsu 1046, 1047
funai 1038, 1046, 1047
TO GIVE 1000, 1003, 1004, 1006, 1022, 1052, 1054, 1087, 1100, 1165, 1166
Star of gold 1004, 1005, 1006, 1012, 1056, 1019, 1082, 1155, 1156, 1172, 1196
Hisense 1237
Hitachi 1004, 1006, 1012, 1013, 1135, 1136, 1145, 1063, 1179, 1185
Infinite 1062, 1130
JVC 1012, 1013, 1014, 1054, 1060, 1063, 1066, 1123, 1157, 1159
Jensen 1004, 1006, 1196
LG 1005, 1082
Magnavox 1004, 1006, 1008, 1019, 1062, 1069, 1075, 1077, 1088, 1130
Mitsubishi 1004, 1005, 1006, 1022, 1051, 1079, 1080, 1082, 1064
Motorola 1003, 1173
Onwa 1038
Panasonic 1003, 1054, 1130, 1062, 1160, 1350, 1351, 1214
Philco 1003, 1004, 1005, 1006, 1008, 1062, 1069, 1019, 1075, 1077, 1082, 1088
Philips 1003, 1004, 1008, 1019, 1012, 1062, 1068, 1069, 1075, 1088, 1087
Pioneer 1004, 1006, 1136, 1185, 1179, 1196
Proscan 1000, 1100, 1181, 1212, 1233
Proton 1004, 1006, 1012, 1196
RCA 1000, 1003, 1004, 1005, 1006, 1007, 1019, 1082, 1096, 1099, 1098
Samsung 1004, 1005, 1012, 1015, 1019, 1082, 1105, 1106, 1171, 1172, 1196
Sansui 1191, 1208, 1282
Sanyo 1004, 1048, 1073, 1080, 1108, 1169, 1180, 1196
Scott 1004, 1006, 1012, 1035, 1038, 1047, 1046, 1196
Sharp 1004, 1006, 1012, 1026, 1029, 1095, 1111, 1112, 1171, 1173, 1196
Signature 1001
Sony 1002, 1205, 1216, 1218
Sylvanie 1004, 1006, 1008, 1019, 1062, 1068, 1075, 1076, 1077, 1088, 1130
Symphonic 1033, 1038, 1189
Technical 1001, 1004, 1005, 1006, 1008, 1013, 1014, 1016, 1038, 1046, 1047, 1063
Toshiba 1049, 1071, 1072, 1073, 1105, 1109, 1117, 1118, 1160, 1283
Yahama 1004, 1005, 1006, 1019, 1082, 1196
Zenith 1004, 1083, 1151, 1152, 1154, 1196, 1210, 1217

How to program the Terk universal remote control with automatic search

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

  1. “Light up” smart device like “TV” that you want the universal remote to work.
  2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  3. Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program Terk Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

How to program the Terk universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

Overview

Well, without wasting a single moment, just apply the universal codes on your electronic device and enjoy your favorite shows undisturbed. If the codes show an error, let us know.

Rate this post

Leave a Comment