Telefunken TV Universal Remote Codes & Program Instructions

For Telefunken tv, we have many universal remote control codes. If you want to program your favorite remote control with your Telefunken TV, you need to use the codes below, either three-digit codes or four-digit codes which you can check below.

Universal 3-digit remote control codes for Telefunken TV

067, 075, 098, 132, 133, 134, 135, 140, 185, 186, 231, 235

Telefunken TV Universal 4-digit remote control

1033, 1069, 1101, 0651, 1102, 1104, 1105, 1107, 1108, 1109, 1113, 1136, 1140, 1181, 1196, 1197, 1198, 1199, 1200, 1201, 1202, 1204, 1404, 1412, 1435, 1469, 1470, 1472, 1477 , 1522, 1523, 1568, 1572, 1648, 1650, 1652, 1658, 1661, 1686, 1702, 1717, 1719, 1734, 1740, 1756, 1757, 1765, 1766, 1773, 1850, 1855, 1866

One for all remote codes for Telefunken TV

0625, 0074, 0560, 0587, 0109, 0335, 0698, 0712, 0343, 0820, 0896, 0754, 0780, 0287, 0891, 1681, 1536, 0753, 0706, 0037, 0556, 0486, 0714, 1556

GE Remote Codes for Telefunken TV

5020, 5071, 0625, 0074, 0560, 0587, 0109, 0335, 0698, 0712, 0343, 0820, 0896, 0754, 0780, 0287, 0891, 1681, 1536, 0753, 0706, 0037, 0556, 0486, 0714, 1556

Universal RCA Remote Control Codes for Telefunken TV

1013, 0702, 2414, 4025, 4302, 10702

How to program the Telefunken TV universal remote control?

  • “Light up” your TV and ” Press and hold “ the tv button then “Enter the codes” that suit your brand
  • Your “The television will be off” when you enter the correct code, it means your setup is complete.

Note: If your TV does not turn off, repeat the procedure with other codes. If not, you can also check the alternative methods.

How to program Telefunken TV universal remote control without codes

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

How to program Telefunken TV Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

  • You must first “Turn on the device”
  • press the “TV” On your “Telefunken TV universal remote control”
  • Now press and hold the “Configuration button” on the universal remote until it displays the “Bright flash” (This means it is in “learning mode”)
  • Finally enter the “Key code” that you have found in the programming guide (Instruction booklet)
  • Once you have done this procedure, all you need to do is “Point your remote control at the television” then “Press and hold the power” button
  • You can release the “Power button” every time the screen turns off

That’s it, your TV will work fine now with the universal remote control, if your device does not work then try repeating the same procedure with the different code from the same part of the reference table.

How to program the Telefunken TV universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

We hope the above methods and codes have been worked out to program your Telefunken TV and also for your favorite remote control. These methods are used for the configuration of the Telefunken remote control.


We end with a note, if you need codes for your Telefunken tv universal remote, leave a comment below and we’ll update them whenever we find them. Thank you for visiting our site.

Rate this post

Leave a Comment