Seiki Blu-Ray Universal Remote Codes & Program Instructions

Seiki Blu-ray DVD players have different universal remote control codes, if you are looking for these codes to program your remote using these codes, here are the codes along with some helpful methods. Simply select the codes below and then enter them according to the procedure mentioned below.

4-Digit Seiki Blu-Ray Universal Remote Control Codes

  • 5006
  • 0178
  • 0002

Seiki Blu-Ray Universal 3-Digit Remote Control Codes

  • 363
  • 113
  • 505
  • 523
  • 526
  • 506
  • 258
  • 050
  • 516

5 Digit Seiki Blu-Ray Universal Remote Control Codes

  • 11864
  • 10178

How to program the Seiki Blu-Ray universal remote control without codes

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

  1. “Light up” smart device like “TV” that you want the universal remote to work.
  2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  3. Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program Seiki Blu-Ray Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

How to program the Seiki Blu-Ray universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

We hope the above methods and codes have been worked out to program your Seiki Blu-Ray player as well as your favorite remote control. These methods are used for the remote control setup of Seiki Blu-Ray Player.


If you feel good with this article then please give us a feedback, it will give us a boost to improve our site and reach many aspiring those who are waiting for their remote control codes, we are also accepting new ones universal remote control codes these will work for you, please leave these codes in the comments section below, we will pass them on to other users as well by posting them on our site.

Rate this post

Leave a Comment