Philips Blu-Ray Universal Remote Codes & Program Instructions

Are you still looking for universal remote control codes for your Philips Blu-ray player, here we provide all kinds of working codes which surely work for all universal remote controls. So just check the codes below and then enter them into your remote using the methods mentioned below.

philips dvd universal remote control codes
  • universal remote control codes philips
  • philips soundbar universal remote control code
  • To note: From the codes below, try the blue color codes first and then try only the remaining codes as these codes worked for many users.

    Universal 5-digit Philips Blu-Ray remote control codes

    • 22506
    • 21276
    • 21506
    • 21340
    • 20503
    • 22084
    • 20675
    • 21158
    • 20646
    • 21354
    • 22434
    • 20539

    Universal 4-digit Philips Blu-Ray remote control codes

    • 0731
    • 0825
    • 0666

    GE universal remote control codes for Philips Blu-ray player

    • 0666
    • 0731
    • 0825

    Universal RCA remote control codes for Philips Blu-ray player

    3162, 3258, 3356, 3383, 3389, 3479, 3480, 3483, 3484, 3486, 3488, 3489, 3490, 3491, 3497, 3498, 3504, 3531, 3607, 3612

    How to program the Philips Blu-Ray universal remote control without codes

    In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

    1. “Light up” smart device like “TV” that you want the universal remote to work.
    2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
    3. Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
    4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
    5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

    How to program Philips Blu-Ray Universal remote control with manual method

    Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

    How to program the Philips Blu-Ray universal remote control with Code search

    If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

    • First of all “Turn on the device”
    • Now press and hold the “To install” button
    • Enter the “9-9-1” code (three digits)
    • Now hold the “Power button” on the remote control, then press the channel upwards until the device in this case your TV “Off”

    The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

    We hope the above methods and codes have been used to program your Philips Blu-Ray player as well as your favorite remote control. These methods are used for setting up the remote control of the Philips Blu-Ray player.


    If you feel good with this article then please give us a feedback, it will give us a boost to improve our site and reach many aspiring those who are waiting for their remote control codes, we are also accepting new ones universal remote control codes these will work for you, please leave these codes in the comments section below, we will also pass them on to other users by posting them on our site.

    Rate this post

    Leave a Comment