Ocosmo Universal Remote Codes & Program Instructions

If you want to program your ocosmo TV with your favorite universal remote, you need to use the codes mentioned below, either three-digit codes or four-digit or five-digit codes, then your TV will be paired with the universal remote .

Ocosmo universal remote control 5-digit codes

  • 13899
  • 10810
  • 10878
  • 11599
  • 10,000
  • 11360
  • 10889

How to program the Ocosmo TV universal remote control?

Use the methods below to program your ocosmo tv remote with your favorite universal remote and the codes have been mentioned in the list above, so use these codes while trying to program your favorite remote with your tv remote.

How to program the Ocosmo universal remote control without codes

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

  1. “Light up” smart device like “TV” that you want the universal remote to work.
  2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  3. Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program Ocosmo Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

How to program the Ocosmo universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions. With the above three methods, we can easily program the universal remote control of our Ocosmo TV.


This article will be useful for every universal remote no matter your brand, you just need to keep checking the codes until your device is programmed with your favorite universal remote.

If you have any questions about the codes, just leave a comment and your issues will be resolved ASAP. Thank you for visiting our website.

Rate this post

Leave a Comment