Are you using the Magnavox Blu-ray player? and are you looking for universal remote control codes for this player? then you have landed at the perfect post, in this blog we give all types of Magnavox Blu-Ray universal remote control codes. So you just have to try the codes using your remote control.
- 0.1 Magnavox Blu-Ray Universal 4 Digit Remote Codes
- 0.2 Universal 5-digit Magnavox Blu-Ray remote control codes
- 1 How to program the Magnavox Blu-Ray universal remote control without codes
- 2 How to program Magnavox Blu-Ray Universal remote control with manual method
- 3 How to program the Magnavox Blu-Ray universal remote control with Code search
In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:
- “Light up” smart device like “TV” that you want the universal remote to work.
- “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
- Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
- Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
- Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.
Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.
If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode
- First of all “Turn on the device”
- Now press and hold the “To install” button
- Enter the “9-9-1” code (three digits)
- Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”
The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.
We hope the above methods and codes have been worked out to program your Magnavox Blu-Ray player and also for your favorite remote control. These methods are used for setting up the Magnavox Blu-Ray Player remote control.
If you feel good with this article then please give us a feedback, it will give us a boost to improve our site and reach many aspiring those who are waiting for their remote control codes, we are also accepting new ones universal remote control codes these will work for you, please leave these codes in the comments section below, we will pass them on to other users as well by posting them on our site.