Did you buy a universal remote control hyundai 553014 or any other model? and do you want to operate your hyundai tv, you need to have the universal remote control codes that we have mentioned below. Simply, you need to follow the steps below and you can easily program your TV with the universal remote.
Contents
- 0.1 4-digit Hyundai TV universal remote control
- 0.2 Hyundai TV 3-digit universal remote control
- 0.3 Hyundai TV 5-digit universal remote control
- 1 How to program the Hyundai TV universal remote control?
- 2 How to program Hyundai TV universal remote control without codes
- 3 How to program Hyundai TV Universal remote control with manual method
- 4 How to program the Hyundai TV universal remote control with Code search
4-digit Hyundai TV universal remote control
- 0698
- 0037
- 0803
- 0556
- 1134
- 0706
- 1376
- 0753
- 0865
- 0860
Hyundai TV 3-digit universal remote control
- 991
- 850
- 125
- 695
- 594
- 550
- 720
- 365
- 087
- 103
Hyundai TV 5-digit universal remote control
- 13418
- 10849
- 11219
- 11294
- 11814
- 16548
Universal RCA Remote Control Codes For Hyundai TV
0849, 1219, 4509, 1294
GE & One-For-All Universal Remote Control Codes For Hyundai TV
1134, 5103, 5110, 5369, 5466, 5467, 4651
Philips universal remote control codes for Hyundai TV
0892, 1015, 4651, 16548, 1315
COMCAST Universal Remote Control Codes for Hyundai TV
10849, 11219, 11294
DIRECTV universal remote control codes for Hyundai TV
13418, 10849, 11219, 11294, 11814
DISH Universal Remote Control Codes For Hyundai TV
125, 695, 594, 550, 720, 365, 087, 103
U-VERSE Universal Remote Codes for Hyundai TV
1134, 1350, 1351, 1352, 1479, 13418, 10849, 11219, 11294
How to program the Hyundai TV universal remote control?
Actually most of the remote controls supported by this hyundai TV use the method below, once try this method to program, if it is not programmed, also use the alternative methods.
- Turn on your “TV”
- For up to 3 seconds, you must hold the “TV and selection” buttons simultaneously. Then the button will flash.
- Now with the button on, you need to point the remote at the TV and then enter the 3, 4 or 5 digit codes
- To check, you need to press the “Volume +” button, your TV volume should be increased.
- Now click on the “TV button” and it will flash twice, it means your codes have been stored successfully.
If you find it unnecessary to program, use the methods below, they might help.
How to program Hyundai TV universal remote control without codes
In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:
Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.
- You must first “Turn on the device”
- press the “TV” On your “Hyundai TV universal remote control”
- Now press and hold the “Configuration button” on the universal remote until it displays the “Bright flash” (This means it is in “learning mode”)
- Finally enter the “Key code” that you have found in the programming guide (Instruction booklet)
- Once you have done this procedure, all you need to do is “Point your remote control at the television” then “Press and hold the power” button
- You can release the “Power button” every time the screen turns off
That’s it, your TV will work fine now with the universal remote control, if your device does not work then try repeating the same procedure with the different code from the same part of the reference table.
How to program the Hyundai TV universal remote control with Code search
If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode
- First of all “Turn on the device”
- Now press and hold the “To install” button
- Enter the “9-9-1” code (three digits)
- Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”
The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.
We hope the above methods and codes have been worked out to program your Hyundai TV as well as your favorite remote control. These methods are used for the setup of the Hyundai remote control.
Conclusion:
If you feel good with this item then please give us a feedback, it will give us a boost to improve our site and to reach many aspiring those who are waiting for their codes remotely, we also accept new ones universal remote control codes those that work for you, please leave these codes in the comments section below, we will pass them on to other users as well by posting them on our site.