We have three methods to set up huayu universal remote control on our favorite device, you can use any of them which is suitable for your device. This huayu universal remote control is one of the best universal remote control, so we recommend you to use this remote control. Below you can check out the huayu universal remote control codes. We have manually checked them in each device and then only providing the functional huayu universal remote control code here. So you just need to choose the code and program it using the methods below.
Huayu Universal Remote Control Code List
Also try these codes
|Mark||Remote control codes for TCL Roku TVs|
|Panasonic||032, 146, 155, 173, 178, 180|
|As TV||261, 278, 305|
|Hisense||078, 209, 284, 345|
|Samsung||006, 030, 020, 068|
|Sharp television||007, 040, 102|
Huayu Universal Remote Codes
To set up the huayu universal remote control for ac, you need to use the automatic search method because the codes of the huayu ac universal remote are not available at the moment. So use the automatic code search method below. If you still have doubts, please contact huayu customer service 086-550-7816508.
Huayu Universal Remote Control Code for Panasonic
032, 146, 155, 173, 178, 180
Huayu Universal Remote Control Code For Skyworth
Huayu Universal Remote Code for TCL
Huayu Universal Remote Control Code for Ace TV
261, 278, 305
Huayu universal remote control code for hisense
078 209 284 345
Huayu Universal Remote Control Code for Samsung
006, 030, 020, 068
Huayu Universal Remote Control Code for Sharp TV
007, 040, 102
How to program Huayu universal remote control without codes
In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:
Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.
- You must first “Turn on the device”
- press the “TV” On your “Huayu Universal Remote Control”
- Now press and hold the “Configuration button” on the universal remote until it displays the “Bright flash” (This means it is in “learning mode”)
- Finally enter the “Key code” that you have found in the programming guide (Instruction booklet)
- Once you have done this procedure, all you need to do is “Point your remote control at the television” then “Press and hold the power” button
- You can release the “Power button” every time the screen turns off
That’s it, your TV will work fine now with the universal remote control, if your device does not work then try repeating the same procedure with the different code from the same part of the reference table.
How to program the Huayu universal remote control with Code search
If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode
- First of all “Turn on the device”
- Now press and hold the “To install” button
- Enter the “9-9-1” code (three digits)
- Now hold the “Power button” on the remote control, then press the channel upwards until the device in this case your TV “Off”
The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.
Now use the huayu universal remote control on your device using the universal remote control codes above. If you have any questions about remote codes like three digits, four digits, leave your query through the comments section below.