Honeywell TV Universal Remote Codes & Program Instructions

Relaxing while watching shows or listening to music is what everyone does especially to end a very busy and long day. To make your relaxation even more comfortable, try using a remote to control multiple devices in your room. If the Honeywell TV remote control is more convenient to use, you only need codes to program each preferred device. Honeywell TV universal remote control codes will be used to configure the device and operate with your remote.

Honeywell TV Universal Remote Code List

One of the keys to successfully programming the Honeywell TV universal remote is the code specific to the make and model of your device. From our long list of Honeywell TV codes, find the one that best matches your favorite device:

Honeywell TV Universal Remote Control Code List

  • 11758
  • 0028
  • 0027
  • 0021
  • 0000

GE and Philips Universal Remote Control Codes and One-For-All for Honeywell TV

  • 6141

How to program the Honeywell TV universal remote control

The process of programming the Honeywell TV remote is very simple. You just need to follow the given instructions and go through the steps one by one. Just take note of the unique Honeywell TV codes you need during the process. After successful setup, you will take full advantage of using the Honeywell TV remote to control your other devices. Below are the instructions you need to follow:

How to program Honeywell TV universal remote control without codes

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

  1. “Light up” smart device like “TV” that you want the universal remote to work.
  2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  3. Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program Honeywell TV Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

How to program the Honeywell TV universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

Conclusion

Have you been helped to program your Honeywell TV remote using the codes above? We wish to hear your experience with us. Please leave a message in the comment box below.

Rate this post

Leave a Comment