GE SAT/DTV/WebTV Universal Remote Codes

Since it is very difficult to find the key code of the universal remote control. But now it’s easy and there is no need to search further on the remote codes. If after you find the key codes, you need to complete the procedure for applying the correct code.

The best part is that the remote will work for all devices at the same time and if you are looking for ge universal remote tv codes So this is it. It is not necessary to buy the different remote control for different devices. Just use the single remote control for all devices.

GE SAT / DTV / WebTV Universal Remote Control Code List

AMPLICA 0575
BELL EXPRESSVU 0654, 0647, 0655, 0628
CHANNEL MASTER 0577, 0578, 0579
CHAPPARAL 0560, 0561
CHEYENNE 0561
DUCK 0562, 0574, 0587
DREAM BOX 0620
DIRECTV 0622, 0632, 0629, 0621, 0623, 0576, 0586, 0616, 0613, 0630, 0634, 0636, 0638, 0641, 0652, 0653, 0657, 0659, 0607, 0619, 0641
PARabolic NETWORK 0655, 0647, 0628, 0612, 0654, 0588, 0589, 0590
DISHPRO 0588, 0589, 0590, 0654
DX ANTENNA 0568, 0582
ECHOSPHERE 0628
ECHOSTAR 0655, 0647, 0628, 0612, 0654, 0588, 0589, 0590
EXPRESSVU 0654, 0647, 0655, 0628
FORTEC STAR 0569, 0555, 0556, 0557, 0558, 0559
FUJITSU 0591, 0592
TO GIVE 0636, 0649, 0637, 0622, 0653, 0650, 0651, 0652
GEMINI 0595
GENERAL INSTRUMENT (GI) 0648, 0640, 0645, 0564, 0565, 0566, 0593, 0627, 0642, 0643, 0644
GLOBECAST 0554
GO VIDEO 0610
HITACHI 0638, 0629, 0630, 0632, 0641, 0607
HUGHES NETWORK 0632, 0638, 0629, 0630, 0641, 0621, 0607, 0580
JVC 0628, 0612
KENWOOD 0598
LUXOR 0599
MAGNAVOX 0576, 0612, 0639
MACOM 0600
MITSUBISHI 0641, 0632, 0638, 0629, 0630, 0607
MOTOROLA 0648, 0618
NORSTAT 0601
RHYTHM 0614, 0615, 0646
PANSAT 0584, 1048
PANASONIC 0626, 0586, 0596
PRIMESTAR 0627, 0640
PHILIPPE 0576, 0612, 0621, 0629, 0630, 0632, 0638, 0641, 0639, 0607
PHILIPS-MAGNAVOX 0576, 0612, 0639
PIONEER 0604
PROSAT 0563
PROSCAN 0636, 0637, 0650, 0653, 0651, 0652
RCA 0636, 0649, 0637, 0622, 0658, 0653, 0650, 0651, 0652, 0098
REALISTIC 0567, 0603
SAMSUNG 0594, 0583, 0613, 0616, 0619
SHARP 0604
SKY NETWORK 0614, 0615, 0646
SIERRA I II III 0561
SONY 0623, 0657, 0659, 0585, 0602
STARCH 0640, 0645, 0627
STAR VIEW 0633
STAR TRAK 0608
STS 0568, 0570, 0571
SUPER GUIDE 0609
SYLVANIA 0581
TOSHIBA 0641, 0632, 0638, 0629, 0630, 0607, 0572, 0624, 0625, 0631
ULTIMATE TV 0653, 0659
UNIDEN 0633, 0573, 0611
UNITED 0597
VIDEO FIGURE II 0574
WEB TV 0612, 0585
ZENITH 0617, 0634, 0656, 0595, 0646, 0562, 0574, 0587, 0635

How to program the GE universal remote control without codes

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

  1. “Light up” smart device like “TV” that you want the universal remote to work.
  2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  3. Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program GE Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

  • You must first “Turn on the device”
  • press the “TV” On your “GE universal remote control”
  • Now press and hold the “Configuration button” on the universal remote until it displays the “Bright flash” (This means it is in “learning mode”)
  • Finally enter the “Key code” that you have found in the programming guide (Instruction booklet)
  • Once you have done this procedure, all you need to do is “Point your remote control at the television” then “Press and hold the power” button
  • You can release the “Power button” every time the screen turns off

That’s it, your TV will work fine now with the universal remote control, if your device does not work then try repeating the same procedure with the different code from the same part of the reference table.

How to program the GE universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

Well, after reading this article, now you can better understand how to use the universal remote control. So just use these universal remote control codes, you can enjoy your favorite shows without having the headache free experience.

Rate this post

Leave a Comment