GE HDTV Set Top Boxes Universal Remote Codes

Universal remote control codes are the codes that you can easily apply through your remote just to control your different devices. So if you want to control your GE HDTV set-top boxes, there is no need to panic. Because you just need to program your universal remote control to control your GE HDTV decoders. So just as per your convenience, the list of codes is given below with simplified methods for entering codes and for tv codes for ge universal remote control please visit this post.

List of universal remote control codes for GE HDTV decoders

GO VIDEO HDT100 0610
HITACHI 61HDX98B 0632
HUGHES HTL-HD 0607, 0632, 0641
HUGHES HIRD-E8 0607, 0632, 0641
LG LSS-3200A 0607, 0632, 0641
LG HTL-HD 0607, 0632, 0641
MITSUBISHI SR-HD5 0632
MITSUBISHI SRHD400 0632
MITSUBISHI SRHD500 0632
MOTOROLA HDT100 0618
PHILIPS DSHD800R 0632
PIONEER SH-D505 0604
PROSCAN PSHD105 0636
RCA HD65W20 0658
RCA PSHD105 0636
RCA DTC-100 0636
RCA DTC-210 0636
SAMSUNG SIR-T165 0583
SAMSUNG SIR-T351 0583
SAMSUNG SIR-TS160 0619
SAMSUNG SIR-TS360 0619
SONY SATHD100 0623
SONY SATHD200 0623
SONY SATHD300 0623
SYLVANIE 6900DTD 0581
TOSHIBA DST3000 0607, 0641
TOSHIBA DST3100 0607, 0641
TOSHIBA DW65X91 0607, 0641
ZENITH HDSAT420 0634
ZENITH HDSAT520 0634
ZENITH DTV1080 0634

How to program the GE universal remote control without codes

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

  1. “Light up” smart device like “TV” that you want the universal remote to work.
  2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  3. Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program GE Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

  • You must first “Turn on the device”
  • press the “TV” On your “GE universal remote control”
  • Now press and hold the “Configuration button” on the universal remote until it displays the “Bright flash” (This means it is in “learning mode”)
  • Finally enter the “Key code” that you have found in the programming guide (Instruction booklet)
  • Once you have done this procedure, all you need to do is “Point your remote control at the television” then “Press and hold the power” button
  • You can release the “Power button” every time the screen turns off

That’s it, your TV will work fine now with the universal remote control, if your device does not work then try repeating the same procedure with the different code from the same part of the reference table.

How to program the GE universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

Through this article you will get the right knowledge about universal remote control codes. Because this article contains the codes that work correctly. So there is no need to look any further.

Rate this post

Leave a Comment