GE DVR Universal Remote Codes

By using GE DVR universal remote control codes, you can manage various devices with one remote control. It is not magic, everything becomes possible thanks to the technology and functional GE DVR universal remote control codes which I will share in this article. So if you were looking for universal GE DVR remote control codes, then here you go. The most useful methods are mentioned below, such as programming your universal remote control without codes, using manual method, using code search.

GE DVR Universal Remote Control Code List

AT&T 0373
HUGHES 0580
HUMAX 0912
PANASONIC 0373, 0387
PHILIPPE 0371, 0344, 0345
PIONEER 0909, 0977
RCA 0409
REPLAYTV 0373
SONIC BLUE 0373
SONY 0372, 0657, 0359
TiVo 0371, 0372, 0344, 0345, 0657, 0983, 0912, 0909
TOSHIBA 0983

For backlit universal remote control codes ge you can check this post.

How to program the GE universal remote control without codes

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

  1. “Light up” smart device like “TV” that you want the universal remote to work.
  2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  3. Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program GE Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

How to program the GE universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

However, I have shared everything you might need, but if you have any questions about these universal GE DVR remote control codes, please feel free to leave a comment, we will answer your question ASAP.

Rate this post

Leave a Comment