GE DVR/SAT Combos Universal Remote Codes

Are you one of the users of SAT Combos universal remote control and want to know all about these remote programming codes and methods, we mention them here. GE DVR / SAT Combos universal remote control codes are very useful and for ge 34459 6-device universal remote control codes check this post, but they should work. Well, here I am sharing some of the working and latest GE DVR / SAT universal remote control codes that you can program your universal remote to manage so many smart devices in your home with just one remote. So, without delay, let’s get started.

GE DVR / SAT Combos Universal Remote Control Codes

BELL EXPRESSVU 0647, 0655
PARabolic NETWORK 0655, 0647
DREAM BOX 0620
ECHOSTAR 0655, 0647
EXPRESSVU 0647, 0655
FORTEC STAR 0569, 0555, 0556
HUGHES NETWORK 0621, 0580
RCA 0653
PHILIPPE 0621
PROSCAN 0653
SAMSUNG 0583
SONY 0657, 0659
ULTIMATE TV 0653, 0659
ZENITH 0656

How to program the GE universal remote control without codes

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

  1. “Light up” smart device like “TV” that you want the universal remote to work.
  2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  3. Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program GE Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

  • You must first “Turn on the device”
  • press the “TV” On your “GE universal remote control”
  • Now press and hold the “Configuration button” on the universal remote until it displays the “Bright flash” (This means it is in “learning mode”)
  • Finally enter the “Key code” that you have found in the programming guide (Instruction booklet)
  • Once you have done this procedure, all you need to do is “Point your remote control at the television” then “Press and hold the power” button
  • You can release the “Power button” every time the screen turns off

That’s it, your TV will work fine now with the universal remote control, if your device does not work then try repeating the same procedure with the different code from the same part of the reference table.

How to program the GE universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

It’s all about the technology and now it’s your turn to use these universal GE DVR / SAT Combos remote control codes to have fun with your devices and use them without any complications with so many remote controls, because now you will have a remote control for all your devices.

Rate this post

Leave a Comment