Are you using the Element TV and have a new universal remote? If you are not sure how to set it up for your TV, follow the methods mentioned below which may allow your Element TV to program with the universal element tv remote control codes mentioned below. The methods below are helpful in finding and programming the perfect code for your element universal remote control. First of all, we will give you all the working codes with this element tv remote control with manual methods or with code search..etc.
- 1 Element Universal Remote Control Code List
- 2 How to program the Element TV remote control
- 3 How to program Element universal remote control without codes
- 4 How to program an element Universal remote control with manual method
- 5 How to program the Element universal remote control with Code search
Element Universal Remote Control Code List
|Mark||Remote codes of the elements|
|TO GIVE||1091, 1651, 5361, 2401, 1025, 5341, 5471, 6021, 4111, 5841, 5831, 5421, 5411, 1173,|
|RCA||13907, 3559, 1886, 12964, 2183, 14217, 1687, 13559, 12183, 11687, 12256, 2964, 11886,|
|Magnavox||0073, 0088, 0001|
|Philips||14156, 1918, 5361, 5421, 5831, 3477, 11147, 14023, 1651, 1091, 5841, 5471, 13656, 14175, 6021, 10862, 4111, 2401, 5411, 5341, 11068, 11568,|
|Westinghouse||0143, 0114, 1146, 0002|
|Xfinity||13559, 11687, 12183, 12964, 13907, 11886|
|Giant||238, 247, 252, 168, 121, 127, 151, 153, 154, 231, 236, 004, 2183|
|Coxswain||1687, 1886, 2183|
|Comcast Xfinity||13559, 11687, 11886, 11864, 12183,10178, 12964, 12260, 13907|
|RCA 3 in 1||11687, 12964, 13559, 11886, 12183|
Universal 4-digit element remote control codes
Element universal 5-digit remote control codes
11886, 10178, 11687, 12183
Element universal 3-digit remote control codes
046, 005, 028, 043, 048, 076, 096, 155, 004, 051, 127, 151, 153, 154, 231, 236, 238, 247, 252, 168, 121
How to program the Element TV remote control
We have mentioned three methods to program your Element TV with the universal remote, use the codes mentioned above to start your remote on your Element TV using the methods below.
How to program Element universal remote control without codes
In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:
Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.
- You must first “Turn on the device”
- press the “TV” On your “Element universal remote control”
- Now press and hold the “Configuration button” on the universal remote until it displays the “Bright flash” (This means it is in “learning mode”)
- Finally enter the “Key code” that you have found in the programming guide (Instruction booklet)
- Once you have done this procedure, all you need to do is “Point your remote control at the television” then “Press and hold the power” button
- You can release the “Power button” every time the screen turns off
That’s it, your TV will work fine now with the universal remote control, if your device does not work then try repeating the same procedure with the different code from the same part of the reference table.
How to program the Element universal remote control with Code search
If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode
- First of all “Turn on the device”
- Now press and hold the “To install” button
- Enter the “9-9-1” code (three digits)
- Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”
The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.
With the above three methods, we can easily program our Element Tv universal remote control.
If you are experiencing any interruptions with the codes, please try another code from the code list above, but you are still experiencing interruptions, leave a comment with your query and we will resolve it as soon as possible.